The project is the entry point. The retainer is the business.
For RCx and MBCx providers and energy engineering firms. Run the project on PEAK, verify the savings in live data, and keep the same buildings on a monitoring retainer.
50%
More active projects, same team
4-5 weeks
Signed to first client live
6,000+
FDD rules from day one
PEAK Professional is the version of PEAK, the Full Loop Building Operations System, that commissioning and energy engineering firms deliver to their own clients.
CIM connects the client's BMS, PEAK detects and diagnoses faults continuously, and every fix is verified in live data. A retro-commissioning (RCx) project carries straight on into monitoring-based commissioning (MBCx), under your contract and your name.
Where a commissioning practice loses time and revenue
Three things cap a commissioning or energy consulting practice today. None of them is the quality of the engineering.
Investigation runs on trend logs and spreadsheets
Engineers export BMS data site by site and look for faults by hand. Aero Performance Group described its previous analysis system as complex and manual.
The engagement ends at the report
The study is delivered, the measures go in, and the relationship closes. Next year's revenue has to be sold all over again.
Savings drift once you leave
A schedule or setpoint change is easy to make and just as easy to undo. Without monitoring, nobody sees it revert until the utility bill arrives.
The same RCx project, by hand and on PEAK
The engineering is the same. What changes is where the hours go, and what is left running when the project is signed off.
from MBCx integration to verified savings at an Illinois high school.
Aero Performance Group on PEAK, ComEd Energy Efficiency Program, 2025. Read the story →
Four stages from RCx project to MBCx retainer
CIM runs the platform. Your engineers run the project, hold the contract and keep the client.
Connect
CIM connects the client's BMS, tags every point and commissions the site. Most client buildings are live in 4-5 weeks.
Investigate
PEAK checks every point against 6,000+ engineering rules and ranks diagnosed faults by impact. Your engineers build the measures plan.
Verify
An action closes as Verified only when the live trend is back in its normal range. That before-and-after record is your evidence for M&V and incentive claims.
Retain
Monitoring carries on after sign-off. A reverted fix shows up as a new alert, and each client report starts from live data.
We do the tagging and commissioning. You keep the relationship and the renewal.
How partners get started →What your engineers work with every day
The AI recommends. Your engineers decide. Every rule is visible and tunable, so the judgement on each building stays with your firm.
A ranked list, not raw trends
Faults arrive diagnosed, with the equipment, the likely cause and the estimated impact. The first hours of a project go on engineering.
Evidence for M&V
Time-stamped trend data before and after each fix, ready to set against utility meter data when you verify savings.
Client reporting from live data
Dashboards and automated reports replace hand-built ones. At Aero Performance Group, most building owners they serve now log in to PEAK themselves.
Answers in plain English
Connect the AI assistant your team already uses and ask what is open, where, and what has been verified.
Firms like yours, already delivering on PEAK
An RCx and MBCx practice in Chicago, a utility-funded school project in Illinois, and an energy consultancy in Manchester.

A commissioning practice that grew without hiring
Aero replaced a manual analysis system with PEAK, added a recurring technology revenue stream and moved fixed-term projects to longer engagements.

HVAC that ran 24/7 for years, back on schedule
21 air handling and rooftop units returned to occupancy schedules. The US$17,480 implementation was 100% funded by ComEd.

About £30,000 saved in three months, no capital spend
CSR Sustain runs a PEAK-based optimisation service at Exchange Quay, with 4,500+ operational issues identified. Figures as reported by CSR Sustain.
"By seamlessly integrating with our systems, PEAK has enabled us to identify energy-saving opportunities more efficiently while providing our clients unmatched visibility into their building performance."
RCx + MBCx · US66 stories from owners, operators and the partners who run their buildings.
See all customer stories →Built for firms that sell engineering expertise
If clients pay your firm for projects, studies and advice rather than maintenance visits, this is how PEAK fits your practice.
RCx and MBCx providers
Run utility-programme and private RCx projects on PEAK, then keep the same buildings on MBCx.
Energy and sustainability consultancies
Turn audits and ratings advice into an ongoing optimisation service, with savings measured on in-use data.
MEP engineering practices
Give your commissioning and building performance team a platform without building one, and stay involved after handover.
The PEAK product for firms that deliver building performance as a service: new revenue, data-driven delivery and client reporting. Maintenance and controls contractors and FM providers run it too.
The partner program →Resources for commissioning and energy engineering firms
The Engineering Firm's Guide to Scaling MBCx
What is PEAK for commissioning and energy engineering firms?+
PEAK Professional is the version of PEAK, CIM's Full Loop Building Operations System, that engineering firms deliver to their own clients. CIM connects the client's BMS, PEAK detects and diagnoses faults continuously and verifies each fix in live data, and your firm runs the RCx project, the MBCx retainer and the client relationship.
How is PEAK different from licensing an analytics platform and building on it?+
A licence-only platform leaves your firm to build and maintain the tagging, the rule library and the workflow. With PEAK, CIM connects, tags and commissions each site, hosts the platform and maintains 6,000+ engineering rules, so your engineers start on live buildings.
How quickly can we run a first project on PEAK?+
Most client buildings are live on PEAK in 4-5 weeks from signing, because CIM does the connecting, tagging and commissioning. Your engineers then work from a ranked list of diagnosed faults.
Does PEAK help with measurement and verification for utility programmes?+
PEAK keeps time-stamped trend data before and after each fix, and an action only closes as Verified when the live trend is back in its normal range. Your engineers use that record with utility meter data for M&V. At an Illinois high school, Aero Performance Group took a ComEd-funded MBCx project from integration to verified savings in under five months.
What happens when the RCx project ends?+
Monitoring carries on. PEAK keeps checking the building, a reverted fix shows up as a new alert, and your client reports start from live data. That is the basis of an MBCx or monitoring retainer on the same buildings.
Who owns the client relationship?+
Your firm does. You hold the contract, the retainer and the renewal. In the markets we cover, CIM does not sell direct against partners or approach your clients.








